◆ Excellent water and oil resistance.
◆ Good heat sealing performance.
◆ Comply with GB9685, FDA food safety standards.
◆ Can recycle pulp.
◆ Match multiple sizing or coating equipment.
Appearance: Milky white liquid
Solid Content: 45.0±2.0%
Viscosity: ＜1000 mPa.s (25℃)
PH: 6.0-9.0 (25℃)
Dispersibility: Dispersible in water
Charge: Anionic
NOTE: This information only indicates a typical property of the product and MUST NOT be taken as specification. Please refer to the Material Safety Data Sheet (MSDS) for further data.
Acrylate polymer, 45% aqueous dispersion
◆ For surface treatment, single or multiple coating.
◆ Compared with single coating, the film covering property and barrier property of oil and water repellent emulsion can be significantly improved by multiple coating under the same coating weight.
◆ Coating methods include measuring rod, scraper, steam knife, gravure plate, etc. It is recommended to
conduct laboratory tests before formal use to determine the best application conditions.
Refer to the MSDS and container label to obtain the relevant product safety, hazards, health and the environment information data before applied.
Storage and Package.
Shelf life is 6 months in sealed, container should be closed when not in use.
Packing: 200kg/drum, 1000kg/IBC (1000L).
◆ Benefits of NCC? SGA-3440.
◆ Good air permeability.
◆ Good water resistance.
◆ Can effectively enhance the stiffness and burst resistance of filter paper.
Appearance: Milky white liquid
Solid Content: 40.0±1.0%
Viscosity: ＜1000 mPa.s (25℃)
PH: 5.0-7.0 (25℃)
Dispersibility: Dispersible in water
Charge: Anionic
Acrylate polymer, 40% aqueous dispersion
◆ Filter paper impregnation system dosage: 100-200 kg per ton of paper.
Dosage may be increased for specialized requirements.
Your account representative will recommend optimal dosage / addition points based on on-site configuration to achieve peak system performance.
Refer to the MSDS and container label to obtain the relevant product safety, hazards, health and the environment information data before applied.
Stored in a cool ventilated dry warehouse with temperature of 5-35℃, and avoid freezing.
Shelf life is 6 months in sealed, container should be closed when not in use.
Packing: 200kg/drum, 1000kg/IBC (1000L).
◆ Excellent stability.
◆ Superior water resistance.
◆ Forms soft yet tough films.
◆ Forms soft yet tough films.
◆ Exceptional freeze-thaw stability.
Appearance: Milky white liquid
Solid Content: 50.0±2.0%
Viscosity: ＜1000 mPa.s (25℃)
PH: 6.0-8.0 (25℃)
Dispersibility: Dispersible in water
Charge: Anionic
Acrylate polymer, 50% aqueous dispersion.
◆ Wallpaper impregnation system dosage: 100-200 kg per ton of paper.
Dosage may be increased for specialized requirements.
Your account representative will recommend optimal dosage / addition points based on on-site configuration to achieve peak system performance.
Refer to the MSDS and container label to obtain the relevant product safety, hazards, health and the environment information data before applied.
Stored in a cool ventilated dry warehouse with temperature of 5-35℃, and avoid freezing.
Shelf life is 6 months in sealed, container should be closed when not in use.
Packing: 200kg/drum, 1000 kg/ IBC (1000L).
◆ Excellent stability.
◆ Superior water resistance.
◆ Forms soft yet tough films.
◆ Forms soft yet tough films.
◆ Exceptional freeze-thaw stability.
Appearance: Milky white liquid
Solid Content: 50.0±2.0%
Viscosity: ＜1000 mPa.s (25℃)
PH: 6.0-8.0 (25℃)
Dispersibility: Dispersible in water
Charge: Anionic
Acrylate polymer, 50% aqueous dispersion.
◆ Wallpaper impregnation system dosage: 100-200 kg per ton of paper.
Dosage may be increased for specialized requirements.
Your account representative will recommend optimal dosage / addition points based on on-site configuration to achieve peak system performance.
Refer to the MSDS and container label to obtain the relevant product safety, hazards, health and the environment information data before applied.
Stored in a cool ventilated dry warehouse with temperature of 5-35℃, and avoid freezing.
Shelf life is 6 months in sealed, container should be closed when not in use.
Packing: 200kg/drum, 1000 kg/IBC (1000L).
◆ Excellent oil resistance.
◆Comply with food-contact packaging safety standards.
◆ Repulpable.
◆ Match multiple sizing or coating equipment.
Appearance: Milky white liquid
Solid Content: 40.0±2.0%
Viscosity: ＜1000 mPa.s (25℃)
PH: 6.0-9.0 (25℃)
Charge: Anionic
NOTE: This information only indicates a typical property of the product and MUST NOT be taken as specification. Please refer to the Material Safety Data Sheet (MSDS) for further data.
Acrylate polymer, 40% aqueous dispersion.
For surface treatment, single or multiple coating.
Coating methods include measuring rod, scraper, steam knife, gravure plate, etc. It is recommended to conduct laboratory tests before formal use to determine the best application conditions.
Refer to the MSDS and container label to obtain the relevant product safety, hazards, health and the environment information data before applied.
Stored in a cool ventilated dry warehouse with temperature of 5-35℃, and avoid freezing.
Shelf life is 6 months in sealed, container should be closed when not in use.
Packing: 200kg/drum, 1000 kg/IBC (1000L).
◆ Excellent moisture and water barrier properties.
◆Enhances paper strength.
◆ ?Reactive sizing or film-forming effect with 100% curing upon sheet drying.
◆ ?Good application stability with consistent dosage and minimal impact on system equipment, ?especially suitable for rainy seasons.
◆ ?Suitable for both internal addition and surface treatment.
◆ Dilutable at any ratio with simple operation without the need to adjust PH.
◆ ?Reduces the amount of surface sizing agent required.
Appearance: Milky white liquid
Solid Content: 25.0±2.0%
Viscosity: ＜300 mPa.s (25℃)
PH: 3.0-6.0 (25℃)
Solubility in water: Soluble
Charge: Cationic
NOTE: This information only indicates a typical property of the product and MUST NOT be taken as specification. Please refer to the Material Safety Data Sheet (MSDS).
Cross-linking cationic polymer, 25% aqueous dispersion.
◆ This product can be used for internal addition or surface sizing, with compatibility tests required before use.
◆ The surface addition rate is 0.3%-3%, depending on the customer's paper quality requirements.
◆ The internal addition rate is 0.5%-3%, depending on the customer's paper quality requirements. It is not recommended for use in waste pulp systems.
Refer to the MSDS and container label to obtain the relevant product safety, hazards, health and the environment information data before using this product.
Stored in a cool ventilated dry warehouse with temperature of 5-35℃, and avoid freezing.
Shelf life is 3 months in sealed, container should be closed when not in use.
Packing: 200kg/drum, 1000KG/IBC (1000L).
